Interior and exterior painting on walls, trim, doors, cabinets, and weathered wood surfaces. Every surface scraped, patched, and primed before the finish coat goes on.
Interior and exterior painting across the home. Walls, ceilings, trim, doors, and cabinetry. Weathered wood siding, decks, and outbuildings on the exterior. Every job includes surface prep, patch work on damaged sections, primer where it belongs, and the finish coats. The product and coat count go on the estimate before scheduling.
Every finish coat only holds as well as the surface underneath it. Walls get washed, scraped, and sanded before priming. Rotted trim and hardened caulk get repaired before exterior painting, never just coated over. Stain blocking primer goes on cedar and redwood so tannins don't bleed through the finish six months later.
Most interior work is two coats of finish over the right primer. Compound patches take a full skim coat and a light sand before priming, so patches disappear under the paint. Sheen gets matched to each room — washable finishes in kitchens and busy hallways, quieter finishes in bedrooms. Every product is named in writing.
Exterior work runs best from late spring through fall. Paint and caulk need warm, dry days to cure properly. Work is scheduled inside the Connecticut temperature window, never into a cold night. Wet weather changes the daily schedule but never the promised finish date more than the forecast requires.
Cabinet doors come off the box and get sprayed in a controlled setting, giving a factory-smooth finish without replacement. Trim gets caulked at every seam before it's coated, so cracks don't reopen with the first heating season. Grain fill on oak is available when the client wants a fully closed finish.
The written estimate names the product line, the number of coats, the primer, and the prep steps. That way nothing gets swapped mid-job and every price line is traceable back to a real material. Warranty length is tied to the product, not to a verbal promise on the walkthrough.
Paint is the last thing you see, but prep is what makes it hold. Seven things separate a job that reads clean at five years from one that peels by winter two.
Every surface gets washed, scraped, and sanded before priming, so the finish coat actually bonds. Rotted trim and hardened caulk get repaired before exterior painting, never just coated over.
Surfaces washed, scraped, and sanded before priming, so the finish coat actually bonds.
Rotted trim and hardened caulk repaired before exterior painting, never just coated over.
Stain blocking primer used on cedar and redwood, so tannins never bleed through the finish.
Sheen matched to each room, with washable finishes in kitchens and busy hallways.
Exterior work scheduled inside the Connecticut temperature window, never into a cold night.
Product, coats, and prep steps named in writing before the job is scheduled.
Bring the drawings, the photos, or just the problem. A written estimate costs nothing and gives you real numbers to plan the whole project around.
Get Your Estimate
Carpentry & Siding
Carpentry & Siding
Carpentry & Siding
Carpentry & Siding
Carpentry & Siding
Carpentry & Siding
Bath & Kitchen Tile
Bath & Kitchen Tile
Bath & Kitchen Tile
Bath & Kitchen Tile
Bath & Kitchen Tile
Bath & Kitchen Tile
Bath & Kitchen Tile
Other Projects
Other Projects
Other Projects
Other Projects
Other Projects
Other Projects
Other Projects
Painting
Painting
Painting
Painting
Painting
Painting
Painting
Roofing & Masonry
Roofing & Masonry
Roofing & Masonry
Roofing & Masonry
Roofing & Masonry
Roofing & Masonry
Roofing & Masonry
Roofing & Masonry
Roofing & Masonry
Roofing & Masonry
A & C carries insurance on all residential painting work in Connecticut. The homeowner is never exposed during the project.
Twenty-five years working on Connecticut homes shapes every job. What we see under the surface has been seen many times before.
Every quote arrives in writing with the scope, materials, and a real start date. There is no cost or obligation attached.
Real feedback from homeowners across Connecticut who trusted A & C General Construction with their projects. Every review is verified through Google.
Painting service covers interior and exterior work on walls, ceilings, trim, doors, cabinets, and weathered wood surfaces. Every job includes surface prep, patch work, priming where needed, and finish coats. The product, coat count, and prep steps are named in the written estimate before scheduling.
Cost depends on the room count, the ceiling height, how much prep is needed, and the product selected. Exterior work adds surface square footage and access complexity. A & C does not quote painting over the phone. The walkthrough and written estimate are free.
No, painting is cosmetic work and does not require a building permit. Homes built before 1978 do fall under federal lead-safe rules for how painted surfaces get disturbed. Prep work in older homes follows those protocols by default.
A single interior room typically runs one to three days including prep, priming, and two finish coats. Full-house exteriors run one to two weeks depending on size and prep needs. Weather-dependent exterior work gets scheduled around the forecast.
Yes. A & C General Construction LLC carries full insurance on every painting project across Connecticut. Every scope also includes a free written estimate before any prep begins, with the product line, coat count, and a real start date listed.
A & C General Construction provides home remodeling in twenty Connecticut towns. Click a town to zoom to its location on the map.
Send the room count or the exterior photos. We respond with a written price, the product line, coat count, and a real start date. Free walkthrough anywhere in Connecticut.
A & C General Construction handles the full residential exterior and interior. Every service below runs under the same crew and the same written-estimate process.
Kitchen, bathroom, and full interior renovations. Layout changes, framing, drywall, trim, and paint under one crew.
Learn More
Roof installation, replacement, repair, and inspections. Decking, ice barrier, flashing, and ventilation as one system.
Learn More
Vinyl, fiber cement, and wood siding installed on residential exteriors. Panels cut, sealed, and fastened tight.
Learn More
Installation, repair, and replacement of interior walls and ceilings. Seams taped, finished, and sanded smooth.
Learn More
Driveways, patios, decks, and siding cleaned. Pressure and detergent matched per surface without damage.
Learn More
